|
/
|
|
|
|
|
AVI-Gallery contains more than 150 animations illustrating analysis results obtained with use of ANSYS and LS-DYNA FE software.
AVI-Gallery
|
|
|
|
|
|
|
|
|
|
 |
|
|
CompMechLab Research Projects
In this section the materials about CompMechLab research projects are presented. All rights are reserved. No one can use any part of these materials in their personal interests without CompMechLab permission.
 |
Numerical simulation and estimation of efficiency of vortex generators to decrease aerodynamic drag of the trailer |
| Keywords: |
Trailer Mercedes Actros, incident flow, CFD, streamlines, vortex generator, aerodynamic resistance |
| Software: |
SolidWorks, ANSYS/CFX |
| Year: |
2006 |
| Reads: 3949 |
Read more... |
| Project Title: |
FE simulation of the separator of the catalytic reforming apparatus. Modal analysis with prestress. |
| Keywords: |
Catalytic reforming, separator, modal analysis, prestress |
| Software: |
SolidWorks, COSMOSWorks |
| Year: |
2006 |
| Reads: 1628 |
Read more... |
 |
Finite element vibration analysis of the pipeline manifold of the catalytic reforming apparatus
under flow pulsation and mechanical loading |
| Keywords: |
Pipeline manifold, catalytic reforming, compressor, separator, vibrations, flow pulsation, vibrodisplacements |
| Software: |
SolidWorks, ANSYS |
| Year: |
2005 |
| Reads: 1669 |
Read more... |
 |
FE 3D Structural Analysis of the W-LBSRP block of JET Tokamak divertor under Electromagnetic Loading |
| Keywords: |
Tokamak, JET (Joint European Torus), ITER, divertor, facing, transient electromagnetic fields, vortical currents, halo-currents, electromagnetic loads, 3D stress state, multiple contact interaction |
| Software: |
CATIA V5, ANSYS/Mechanical, ANSYS/EMAG |
| Year: |
2005 |
| Reads: 2120 |
Read more... |
 |
Finite element analysis of the steel cable failure with consideration of contact interaction between cable plies |
| Keywords: |
Steel cable, contact interaction, plies, stiffening due to friction, effective stiffness characteristics |
| Software: |
Pro/Engineer, LS-DYNA |
| Year: |
2005 |
| Reads: 2972 |
Read more... |
 |
FE Modeling and Structural Analysis of a Hydraulic Press |
| Keywords: |
Hydraulic press, welded joints, stress concentration, shell model |
| Software: |
SolidWorks, ANSYS |
| Year: |
2005 |
| Reads: 2062 |
Read more... |
 |
FE modeling and thermostructural analysis of the ball stop cock |
| Keywords: |
Pipeline equipment, ball stop cock, thermostructural analysis |
| Software: |
SolidWorks, CosmosWorks |
| Year: |
2005 |
| Reads: 2997 |
Read more... |
 |
FE Simulation and Analysis of the Minibus Ventilation System |
| Keywords: |
Ventilation, minibus, streamlines, velocity and pressure fields |
| Software: |
SolidWorks, CosmosFloWorks |
| Year: |
2005 |
| Reads: 1925 |
Read more... |
 |
Structural Analysis of the Arresting Gear Movable Carriage |
| Keywords: |
Contact interaction, bolt pretension |
| Software: |
SolidWorks, CosmosWorks, ANSYS |
| Year: |
2005 |
| Reads: 2978 |
Read more... |
 |
FE modeling and modal analysis of the reciprocating compressor of the catalytic reforming apparatus. |
| Keywords: |
Catalytic reforming, compressor, sucktion buffers, electrical motor, foundation, modal analysis |
| Software: |
SolidWorks, COSMOSWorks, ANSYS |
| Year: |
2005 |
| Reads: 2042 |
Read more... |
Projects: 36
[ 1 | 2 | 3 | 4 ] | |
